Detailed Product Description

JS/FJS compound waterproof coating is green environmental protection is waterproof coating, belong to national recommend residential building waterproof coating. This material is made of organic and inorganic powder liquid composite waterproof coating, two-component elastic with organic materials, high durability and good characteristic of inorganic materials. After the high wax can be formed with strong waterproof coating wax.

the product features

wet or dry in a variety of materials directly on the grass-roots construction, facade is not flowing.
coated with high-strength tough, water, weather, excellent durability.
pigments can be added to form a color coating.
Water-based coating produced non-toxic, tasteless, non-polluting, and environmental protection.
construction of simple, short construction period, construction on the grass roots in moist, cohesive and strong.
coating has a certain degree of permeability, even though construction on the grassroots level, and strong bonding.

Applicable scope

JS/FJS composite waterproof coating can be in wet or dry mortar and concrete, brick, metal, wood, plastics, glass, plasterboard, foam board, asphalt, rubber, SBS coil, APP coil, polyurethane coating on the basis of the construction. Industrial and civil buildings such as old houses, metope, ground,, tunnels, Bridges, cistern, reservoir, toilet, kitchen, etc. Can be used.

Construction process

Basic level processing

primary surface shall be smooth, solid, no sharp objects, dust and clear water, oil removal and cadres.
Yin-Yang angle and the root of such pipelines should be made arc-shaped surface, Yin corner radius is greater than 25mm, Yang corner radius is greater than 5mm.
Office should first leveling uneven and full of cracks, leaks must first deal with plugging.

Ingredients

If you need to add water, the first compound in liquid water, while mixing with the mixer while slowly adding powder, stirring 5 minutes, stirring until the compound does not contain uniformly granular, with a good material should be used within 2 hours, or sticky will affect the construction of a high degree of length.
The weight ratio of coating method of marking on the product packaging by proportion of ingredients, add the amount of water can be properly adjusted to adjust the paint viscosity to meet the different parts of the facade and flat construction.
fill in dense material embedded in the groove, in the yin and yang, angle, tube roots detail should be many times (2-5 times) brushing, underground works should again too thick facade of construction should not add water or less water as well, so as to avoid coating flows.
paved matrix material, the matrix should be flat, no wrinkles, lap of not less than 100 mm, painted it again during the construction of the first coating, laid out after brushing the top and then paint again.
waterproof coating layer is completed after acceptance, the finished product should be protected.

Note

0 below the environment and rain, snow and weather can not be construction, interior construction thermal insulation can be done.
With the use of materials to be used with the allocation, after the curing mixture can not add water reuse.
water test shall be such as coating completely dries (48 hours under normal circumstances to be above) to proceed. Special moist environment of pairs of non-ventilated environment without ventilation needed longer.
film thickness should be uniform, to meet the requirements, are not allowed off, cracking, wrinkled skin, heap skin, bubbles, or defects such as closed head not tight.
brushing between the layers again before the interval to be non-stick coating solid preparation for the drive, and the two should be perpendicular to the direction of James scratch.

Packaging transportation and storage

JS / FJS composite waterproof coating for plastic barrels sealed packaging, powder for the plastic bag sealed packaging.
Paint storage temperature above 5 , powder stored in a cool dry place.
storage shelf-life of 12 months, extended use should be certified before retesting.